Why Combine a Suction Cup with a Harness?
A suction cup base lets you stick a dildo to a smooth surface for hands-free play, but you can also use that same base to secure the toy in a strap-on harness. This gives you the flexibility to switch between stationary and worn use without buying a separate harness-compatible toy. The Tantus Suction Cup is designed specifically for this dual purpose.
Tantus Suction Cup at a Glance
- Suction Cup: Made of 100% Ultra-Premium Silicone. Silicone is body-safe, non-porous, and easy to clean, making it a reliable material for both solo and partnered play.

Suction Cup - Suction Cup: Compatible with all Tantus vibrator toys, Vixen vibrator toys, Topco bullet vibrator toys, and many others. You don't need a specific brand of toy—this suction cup works with a wide range of popular vibrators, so you can likely use it with what you already own.
- Suction Cup: Base diameter: 3 inches; Stem diameter: .62 inches (5/8 inch). The 3-inch base is large enough to grip securely in most harness rings, while the 5/8-inch stem fits standard bullet and vibrator openings.
How to Attach the Suction Cup to a Harness
Follow these steps to turn your suction cup dildo into a harness-compatible toy.
- Remove the suction cup from the toy: If your suction cup is already attached to a vibrator or dildo, gently pull it off. The silicone stem is flexible, so it should release without much force.
- Thread the stem through the harness ring: Place the suction cup's stem (the 5/8-inch wide part) through the O-ring of your harness. The flat base should sit against the inside of the ring, facing your body.
- Secure the toy in the harness: Reattach the vibrator or dildo to the suction cup's stem. The toy will now be held firmly in place by the harness ring, with the suction cup acting as a stabilizer.
- Adjust the position: Tighten the harness straps so the toy sits comfortably against your body. The suction cup base helps prevent the toy from sliding or rotating during use.
Tips for a Secure Fit
The Tantus Suction Cup has a newly improved design with no uneven bottoms or occasional wobbles, so you get a stable hold in your harness. For the best grip, make sure the harness ring is large enough to accommodate the 3-inch base—most standard harness rings will work. If your harness has a smaller ring, you may need to use a ring adapter or choose a different toy.
Because the suction cup is made of silicone, avoid using silicone-based lubricant with it. Stick to water-based lube to protect the material and keep the toy functioning properly.
Cleaning and Care
After each use, remove the suction cup from the toy and wash both with warm water and mild soap, or use a dedicated toy cleaner. Silicone is non-porous, so it resists staining and odors. Let the suction cup air dry completely before storing it away from direct sunlight and other silicone toys to prevent material reactions.


